|
|
|
|
| |
|
| |
| Austrains 80 class 8028 was used to do the inugural run on the layout. DCC was used via my NCE
system, I used the Radio throttle so I could follow and catch the loco if needed.
It dedn't derail, and I then did another run with my digital camera recording it, that file is too big (75mb) but a smaller file (35MB) is shown below. Yes, two wagons have fallen off going to the floor - my fault as I reversed off the "head of steel" - on two seperate occasions. Either I put up some protecting cxardboard strips, or I continue work on the layout without trying the track. This is the key point I think, the desire to run which can hamper work. But am I strong enough ???? | |
 |
 |
|
about to head onto the spline roadbed and the outer track. |
(which they have twice already). |
 |
 |
|
now on the other side of the peninsular. |
The alligator clips provide temporary power. |
 |
 |
|
|
|
 |
 |
|
|
|
 |
|
|
back down the line to the "station". |
up the line from the "station". |
|
|
|
|
| |
Page written & maintained by David Head.david@nmit.vic.edu.au